Froth Pump Pulp Foam Pump
Pump | Discharge | 152mm |
Suction | 354mm | |
Impeller | Vanes | 5 |
Vane ø | 560mm | |
Type | open | |
Part No | Material | |
SAF6127 | Metal | |
Frame (Rating - KW) | 63mm | |
Curve | Revision | 1 |
Revision Notes | VANE DIAMETER WAS 540 | |
Reference | PREDICTED | |
Issued | Aug 98 | |
CURVE SHOWS APPROXIMATE PERFORMANCE FOR CLEAR WATER (International Test Standard ISO9906:1999 - Grade 2 unless otherwise specified). For media other than water, corrections must be made for density, viscosity and/or other effects of solids. WEIR MINERALS reserves the right to change pump performance and/or delete impellers without notice. Frame suitability must be checked for each duty and drive arrangement. Not all frame alternatives are necessarily available from each manufacturing centre. 
Related Products
.png)
Yes, we are a manufacturer of slurry pump in China since 2008.
Yes, OEM/ODM are available.
T/T Bank Wiring, L/C, Western Union, Moneygram, Paypal.
By sea, air, railway.
Slurry pumps typically have a volute casing which is rubber lined, as well as a rubber lined impeller in order to minimise wear to internal metal parts. As slurries can be highly abrasive, and travel at high velocity the rubber is used as a sacrificial liner.
As the rubber wears, the tolerances within the unit become larger meaning the pump becomes less efficient. Designs have front and rear adjustment to reduce internal clearances to improve unit efficiency as they wear.